9 Trouble-shooting PROline Promag 50
96 Endress+Hauser
9.6 Spare parts
Chap. 9.1 contains a detailed trouble-shooting guide. The measuring device,
moreover, provides additional support in the form of continuous self-diagnosis and error
messages.
Fault rectification can entail replacing defective components with tested spare parts.
The illustration below shows the available scope of spare parts.
!
Note!
You can order spare parts directly from your E+H service organisation by providing the
serial number printed on the transmitter's nameplate (Page 9 ff.).
Spare parts are shipped as sets comprising the following parts:
•Spare part
• Additional parts, small items (threaded fasteners, etc.)
• Mounting instructions
•Packaging
Fig. 47: Spare parts for Promag 50 transmitter (field and wall-mounted housings)
1 Power supply board (85...260 V AC, 20...55 V AC, 16...62 V DC)
2 Amplifier board
3 I/O board
4 S-DAT (sensor data memory)
5 Display module
F06-50xxxxxx-03-06-06-xx-000
1
2
3
5
4
To Next Page
Loading...
