Endress+Hauser Proline Promag 50 - Foundations, Supports

PROline Promag 50 3 Installation
Endress+Hauser 19
3.2.5 Foundations, supports
If the nominal diameter is DN ≥ 350, mount the transmitter on a foundation of adequate
load-bearing strength.
"
Caution!
Risk of damage. Do not support the weight of the sensor on the metal casing:
the casing would buckle and damage the internal magnetic coils.
Fig. 13: Correct support for large nominal diameters (DN ≥ 350)
F06-5xFxxxxx-11-05-xx-xx-000