PROline Promag 50 10 Technical data
Endress+Hauser 117
Promag H
Transmitter housing:
• Compact housing: powder coated die-cast aluminium or
stainless-steel field housing 1.4301/316L
• Wall-mounted housing: powder coated die-cast aluminium
Sensor housing: 1.4301
Wall mounting (holder panel): 1.4301
Measuring tube: stainless steel 1.4301 or 1.4306/304L
Flange:
• All connections 1.4404/316L
• Flanges (EN (DIN), ANSI, JIS) made of PVDF
• Adhesive fitting made of PVC
Ground rings: 1.4435/316L, Option: tantalum, Alloy C-22
Electrodes:
• Standard: 1.4435
• Option: Alloy C-22, tantalum, platinum/rhodium 80/20 (up to DN 25 only)
Seals:
• DN 2…25: O-ring (EPDM, Viton, Kalrez) or gasket seal (EPDM, silicone, Viton)
• DN 40…100: gasket seal (EPDM, silicone)
Material load diagram The material load diagrams (pressure-temperature graphs) for the process connections
are to be found in the following documents:
• Technical Information “Promag 50/53 W” (TI 046D/06/en)
• Technical Information “Promag 50/53 P” (TI 047D/06/en)
• Technical Information “Promag 50/53 H” (TI 048D/06/en)
Fitted electrodes Promag W:
Measuring, reference and EPD electrodes
• Standard available with 1.4435, Alloy C-22, tantalum
• Optional: exchangeable measuring electrodes made of 1.4435 (DN 350…2000)
Promag P:
Measuring, reference and EPD electrodes
• Standard available with 1.4435, Alloy C-22, tantalum
• Optional: reference electrode and EPD electrodes made of platinum/rhodium 80/20
Promag H:
Measuring electrodes and EPD electrodes
• Standard available with 1.4435, Alloy C-22, tantalum, platinum/rhodium 80/20
• DN 2…4: without EPD electrode
To Next Page
Loading...
