Endress+Hauser Proline Promag 50 - Page 126

10 Technical data PROline Promag 50
126 Endress+Hauser
Promag W / DN ≥ 350 (remote version)
Fig. 59: Dimensions Promag W / DN ≥ 350 (remote version)
Dimensions wall-mounted housing
→ seePage122
DN L A B C K E
EN (DIN)
[mm]
ANSI
[inch]
[mm] [mm] [mm] [mm] [mm] [mm]
350 14" 550 683.5 401.5 282.0 564 276
400 16" 600 735.5 427.5 308.0 616 276
450 18" 650 785.5 452.5 333.0 666 292
500 20" 650 836.5 478.0 358.5 717 292
600 24" 780 940.5 530.0 410.5 821 402
700 28" 910 1143.5 631.5 512.0 1024 589
750 30" 975 1143.5 631.5 512.0 1024 626
800 32" 1040 1186.5 653.0 533.5 1067 647
900 36" 1170 1339.5 729.5 610.0 1220 785
1000 40" 1300 1491.5 805.5 686.0 1372 862
1050 42" 1365 1543.5 831.5 712.0 1424 912
1200 48" 1560 1741.5 930.5 811.0 1622 992
1350 54" 1755 1943.5 1031.5 912.0 1824 1252
1400 56" 1820 2093.5 1106.5 987.0 1974 1252
1500 60" 1950 2141.5 1130.5 1011.0 2022 1392
1600 64" 2080 2231.5 1175.5 1056.0 2112 1482
1650 66" 2145 2305.5 1212.5 1093.0 2186 1482
1800 72" 2340 2495.5 1307.5 1188.0 2376 1632
2000 78" 2600 2595.5 1357.5 1238.0 2476 1732
The fitting length (L) is always the same, regardless of the pressure rating.
129
A
C
B
102
163
143
K
L
E
F06-xxFxxxxx-06-05-xx-xx-001