Endress+Hauser Proline Promag 50 - Page 138

10 Technical data PROline Promag 50
138 Endress+Hauser
Process connections with O-ring seals (DN 2…25)
Weld nipples
1.4404 / 316L
5*H**-B***********
Sensor Fits to di G L H x B
DN [mm] Piping
DIN EN ISO 1127
[mm] [mm] [mm] [mm]
2…8 13.5 x 1.6 10.3 13.5 20.3 60 x 42
15 21.3 x 1.6 18.1 21.3 20.3 60 x 42
25 (DIN) 33.7 x 2 29.7 33.7 20.3 70 x 52
Fitting length = (2 x L) + 86 mm
G
di
H x B
L
F06-xxHxxxxx-06-09-07-xx-010
Weld nipples for IPS pipe
1.4404 / 316L
5*H**-C***********
Sensor Fits to di G L H x B
DN [mm] Piping OD/SMS [mm] [mm] [mm] [mm]
2…8 13.5 x 2.3 9.0 13.5 20.3 60 x 42
15 21.3 x 2.65 16.0 21.3 20.3 60 x 42
25 (1" ANSI) 33.7 x 3.25 27.2 33.7 22.3 70 x 52
Fitting length = (2 x L) + 86 mm
G
di
L
H x B
F06-xxHxxxxx-06-09-07-xx-012
Flange PN 40 EN 1092-1
(DIN 2501), 1.4404 / 316L
5*H**-D***********
Sensor Fits to di G L LK M H x B
DN [mm] Flange EN1092-1
(DIN 2501)
[mm] [mm] [mm] [mm] [mm] [mm]
2…8 DN 15 17.3 95 56.2 65 14 60 x 42
15 DN 15 17.3 95 56.2 65 14 60 x 42
25 (DIN) DN 25 28.5 115 56.2 85 14 70 x 52
Fitting length = (2 x L) + 86 mm
Fitting length to DVGW (200 mm)
G
M
di
LK
L
H x B
F06-xxHxxxxx-06-09-07-xx-014
Flange CI 150 / ANSI 16.5
1.4404 / 316L
5*H**-E***********
Sensor Fits to di G L LK M H x B
DN [mm] Flange ANSI 16.5 [mm] [mm] [mm] [mm] [mm] [mm]
2…8 1/2" 15.7 89 66.0 60.5 15.7 60 x 42
15 1/2" 16.0 89 66.0 60.5 15.7 60 x 42
25 (1" ANSI) 1" 26.7 108 71.8 79.2 15.7 70 x 52
Fitting length = (2 x L) + 86 mm
G
di
LK
H x B
L
M
LK
F06-xxHxxxxx-06-09-07-xx-015