Proline Promag W 500
Endress+Hauser 107
cCSAus
Currently, the following versions for use in hazardous areas are available:
IS (Ex i), XP (Ex d)
Transmitter Sensor
Class I, III, III Division 1 Groups A-G
NI (Ex nA)
Transmitter Sensor
Class I Division 2 Groups A - D
Ex de
Transmitter Sensor
Class I, Zone 1 AEx/ Ex de ia IIC T6…T4 Gb Class I, Zone 1 AEx/Ex e ia IIC T6…T1 Gb
Ex d
Transmitter Sensor
Class I, Zone 1 AEx/ Ex d ia IIC T6…T4 Gb Class I, Zone 1 AEx/Ex e ia IIC T6…T1 Gb
Ex nA
Transmitter Sensor
Class I, Zone 2 AEx/ Ex nA IIC T5...T4 Gc Class I, Zone 2 AEx/Ex nA ic IIC T5...T1 Gc
Ex tb
Transmitter Sensor
Zone 21 AEx/ Ex tb IIIC T85 °C Db Zone 21 AEx/ Ex ia tb IIIC T** °C Db
Pharmaceutical compatibility
• FDA
• USP Class VI
• TSE/BSE Certificate of Suitability
Drinking water approval
• ACS
• KTW/W270
• NSF 61
• WRAS BS 6920
HART certification HART interface
The measuring device is certified and registered by the FieldComm Group. The measuring system
meets all the requirements of the following specifications:
• Certified according to HART 7
• The device can also be operated with certified devices of other manufacturers (interoperability)
FOUNDATION Fieldbus
certification
FOUNDATION Fieldbus interface
The measuring device is certified and registered by the FieldComm Group. The measuring system
meets all the requirements of the following specifications:
• Certified in accordance with FOUNDATION Fieldbus H1
• Interoperability Test Kit (ITK), revision version 6.2.0 (certificate available on request)
• Physical Layer Conformance Test
• The device can also be operated with certified devices of other manufacturers (interoperability)
To Next Page
Loading...
