Endress+Hauser Proline Promag W 500 - Conductivity; Pressure-Temperature Ratings; Proline Promag W

Proline Promag W 500
54 Endress+Hauser
Conductivity
≥ 5 μS/cm for liquids in general. Stronger filter damping is required for very low conductivity values.
Proline 500
The necessary minimum conductivity also depends on the cable length →  49.
Pressure-temperature
ratings
The following pressure/temperature diagrams apply to all pressure-bearing parts of the device and
not just the process connection. The diagrams show the maximum permissible medium pressure
depending on the specific medium temperature.
Process connection: fixed flange according to EN 1092-1 (DIN 2501)
0
5
10
15
20
25
35
30
40
[bar][psi]
-40
-20
0 20
40 60 80 100 140 180 [°C]
360 [°F]
0-40 100 200 300
200
100
400
300
500
600
0
120 160
PN25
PN16
PN10
PN 6
PN40
PN25
PN16
PN10
PN 6
PN40
A0029390-EN
 32 Process connection material: stainless steel, 1.4404/1.4571/F316L; carbon steel, A105/FE410WB/
P250GH/S235JRG2/S235JR+N
Process connection: fixed flange according to ASME B16.5
[bar][psi]
-40
-20
0 20
40 60 80 100 140 180 [°C]
360 [°F]
0-40 100 200 300
200
100
400
300
500
600
0
120 160
Class300
Class150
0
10
20
30
40
50
60
800
700
900
A0029394-EN
 33 Process connection material: stainless steel, F316L similar to 1.4404