Endress+Hauser Proline Promag W 500 - Supplementary Documentation; Standard Documentation; Device-Dependent Additional Documentation

Proline Promag W 500
Endress+Hauser 113
Supplementary documentation
For an overview of the scope of the associated Technical Documentation, refer to the following:
• W@M Device Viewer (www.endress.com/deviceviewer): Enter the serial number from
nameplate
• Endress+Hauser Operations App: Enter the serial number from the nameplate or scan the 2D
matrix code (QR code) on the nameplate
Standard documentation Brief Operating Instructions
Brief Operating Instructions for the sensor
Measuring device Documentation code
Proline Promag W KA01266D
Brief Operating Instructions for transmitter
Measuring device
Documentation code
HART
FOUNDATION
Fieldbus PROFIBUS PA PROFIBUS DP Modbus RS485 EtherNet/IP PROFINET
Proline 500 KA01312D KA01293D KA01231D KA01387D KA01316D KA01342D KA01348D
Operating Instructions
Measuring device Documentation code
HART FOUNDATION
Fieldbus
PROFIBUS PA PROFIBUS DP Modbus RS485 EtherNet/IP PROFINET
Promag W 500 BA01400D BA01481D BA01406D BA01868D BA01403D BA01722D BA01725D
Description of Device Parameters
Measuring device Documentation code
HART FOUNDATION
Fieldbus
PROFIBUS PA PROFIBUS DP Modbus RS485 EtherNet/IP PROFINET
Promag 500 GP01054D GP01099D GP01056D GP01136D GP01055D GP01118D GP01119D
Device-dependent
additional documentation
Safety instructions
Safety instructions for electrical equipment for hazardous areas.
Contents Documentation code
ATEX/IECEx Ex i XA01522D
ATEX/IECEx Ex ec XA01523D
cCSAus IS XA01524D
cCSAus Ex e ia/Ex d ia XA01525D
cCSAus Ex nA XA01526D
INMETRO Ex i XA01527D
INMETRO Ex ec XA01528D
NEPSI Ex i XA01529D
NEPSI Ex nA XA01530D