Endress+Hauser Proline Promag W 500 - Weight

Proline Promag W 500
86 Endress+Hauser
DN Pressure rating A B D H
[in] [in] [in] [in] [in]
14 ASME,
Class 150
13.5 15.8 18.9 14.4
16 DIN, PN 6 15.5 18.5 21.3 15.6
16 DIN, PN 10 15.5 18.5 21.3 15.6
16 ASME,
Class 150
15.5 18.5 21.3 15.6
18 DIN, PN 6 17.3 20.7 23.0 16.4
18 DIN, PN 10 17.3 21.1 23.0 16.4
18 ASME,
Class 150
17.3 21.1 23.0 16.4
20 DIN, PN 6 19.4 23.3 25.6 18.1
20 DIN, PN 10 19.4 23.2 25.6 18.1
20 ASME,
Class 150
19.4 23.2 25.6 18.1
24 DIN, PN 6 23.4 27.3 30.2 20.6
24 DIN, PN 10 23.4 27.1 30.2 20.6
24 ASME,
Class 150
23.4 27.1 30.2 20.6
28 DIN, PN 6 27.4 – 30.9 18.1
28 DIN, PN 10 27.3 – 32.0 18.9
28 AS, PN 16 27.1 – 31.8 19.3
28 AWWA, Class D 27.3 – 32.8 19.5
30 AWWA, Class D 29.3 – 32.8 20.6
32 DIN, PN 6 31.5 – 35.2 20.5
32 DIN, PN 10 31.3 – 36.2 21.3
32 AS, PN 16 31.1 – 36.0 21.7
32 AWWA, Class D 31.3 – 37.0 22.1
36 DIN, PN 6 35.3 – 39.1 22.4
36 DIN, PN 10 35.2 – 40.2 23.2
36 AS, PN 16 34.9 – 39.9 23.4
36 AWWA, Class D 35.2 – 41.3 24.2
40 DIN, PN 6 39.3 – 43.0 24.4
40 DIN, PN 10 39.2 – 44.4 25.6
40 AS, PN 16 38.9 – 44.5 26.0
40 AWWA, Class D 39.2 – 45.8 26.6
42 AWWA, Class D 41.1 – 48.0 27.7
48 DIN, PN 6 47.4 – 51.6 28.9
1) Ground disks can be used for all the flange standards/pressure ratings which can be supplied in the
standard version.
Weight
All values (weight exclusive of packaging material) refer to devices for standard pressure ratings.
Transmitter
• Proline 500 aluminum: 6.5 kg (14.3 lbs)
• Proline 500 cast, stainless: 15.6 kg (34.4 lbs)