Endress+Hauser Proline Promag W 800 - Product Identification

Incoming acceptance and product identification Proline Promag W 800
10 Endress+Hauser
If you have answered "no" to one of the questions above:
Contact your Endress+Hauser Sales Center.
4.2 Product identification
It is possible to identify the measuring device in the following ways:
• Using the nameplate specifications
• Using the order code with a breakdown of the device features on the delivery note
• By entering the serial number on the nameplates into the W@M Device Viewer
(www.endress.com/deviceviewer): All the information pertaining to the measuring device is
displayed.
For an overview of the scope of the Technical Documentation provided, please see:
The W@M Device Viewer: Enter the serial number on the nameplate
(www.endress.com/deviceviewer)
A0014053
Fig. 2: Example of nameplate
1Order code
2 Serial number (Ser.No.)
3 Extended order code (Ext. ord. co.)
Detailed information on the breakdown of the nameplate data:
Operating Instructions for the device on the enclosed CD-ROM
A0013696 A0013697
CD-ROM available with technical documentation and documents?
Order code:
Ext. ord. cd.:
Ser. no.:
1
2
3