Proline Promag W 800 Storage, transport and disposal of packaging
Endress+Hauser 13
"
Caution!
Note the following when transporting the device:
• Transport the measuring device to the measuring point in its original packaging.
• Do not remove protective covers or protection caps mounted on process connections.
They prevent mechanical damage to the sealing surfaces and fouling in the measuring pipe.
• Pay attention to the weight information on the packaging (adhesive label).
• Observe the transportation instructions on the adhesive label on the electronics compartment
cover.
• Do not lift the measuring device by the transmitter housing or the connection housing of the
remote version.
• Lifting tool
– Use webbing slings (avoid chains as these could damage the housing).
– For wood crates, the floor structure enables these to be loaded lengthwise or broadside
using a forklift.
• Using the webbing slings, lift the measuring device by the process connections, not by the
transmitter housing.
5.3 Disposing of the packaging
Detailed information on the disposal of packaging material:
Operating Instructions for the device on the enclosed CD-ROM
To Next Page
Loading...
