Proline Promag W 800 Basic safety instructions
Endress+Hauser 7
2.4 Operational safety
Risk of injury.
• Only operate the device if it is in a perfect technical condition free from errors and faults.
• The operator is responsible for the trouble-free operation of the device.
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable
dangers:
• If, despite this, modifications are required, consult with Endress+Hauser.
Repair
To ensure operational safety:
• Only perform repair work on the device if this is expressly permitted.
• Comply strictly with national regulations concerning the repair of electrical equipment.
• Only use genuine Endress+Hauser spare parts and accessories.
Hazardous area
To exclude any risks to individuals or the facility when operating the device in the hazardous
areas:
• Based on the nameplate, check whether the ordered device is permitted for the intended use
in the hazardous area.
2.5 Product safety
This measuring device is designed to meet state-of-the-art safety requirements in accordance
with sound engineering practice, has been tested and left the factory in a condition in which it
is safe to operate.
It meets the general safety requirements and legal requirements. Furthermore, it complies with
the EC directives which are listed in the device-specific EC Declaration of Conformity.
Endress+Hauser confirms this by affixing the CE mark to the device.
To Next Page
Loading...
