Endress+Hauser Proline Promag W 800 - Access to the Operating Menu Via the Onsite Display

Operating options Proline Promag W 800
48 Endress+Hauser
8.3 Access to the operating menu via the onsite display
8.3.1 Operating elements and display area
The measuring device has three operating elements and one display area.
A0016977
Fig. 31: Operating elements and display area of the measuring device
Operating elements
2011/07/01
BOARD T.:
ANT.SIG:
19 : 45
+25°C
[ OFF ]
ALARM 1/3:
B3 LOW
Key Operation Meaning
Press briefly
(<1 second)
• Scroll up through the parameters
• Scroll up through the options
• Increase the numerical values
• If several alarms are active: scroll up through the alarm list
Press and hold
(>1 second)
• Scroll down through the parameters
• Scroll down through the options
• Decrease the numerical values
• If several alarms are active: scroll down through the alarm list
Press briefly
(<1 second)
• Change the display area or the display values
• Move the cursor to the right
• Scroll down through the parameters
Press and hold
(>1 second)
• Change the display area or the display values
• Move the cursor to the left
• Scroll up through the parameters
Press briefly
(<1 second)
• Select the menu
• Select the parameter
• Confirm the entry, selection
Press and hold
(>1 second)
• Exit the current menu
• Return to the main menu
• Return to the display
•Switch display on/off