Endress+Hauser Proline Promass E 100 - Page 58

Proline Promass E 100
58 Endress+Hauser
Flange connections
Fixed flange EN 1092-1, ASME B16.5, JIS B2220
C
D
A
B
E
L
A0015621
Length tolerance for dimension L in mm:
+1.5 / –2.0
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N), PN 40
1.4404 (F316/F316L): order code for "Process connection", option D2S
Flange with groove according to EN 1092-1 Form D (DIN 2512N), PN 40
1.4404 (F316/F316L): order code for "Process connection", option D6S
DN
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
E
[mm]
L
[mm]
8
1)
95 65 4 × Ø14 16 17.3 232/510
2)
15 95 65 4 × Ø14 16 17.3 279/510
2)
25 115 85 4 × Ø14 18 28.5 329/600
2)
40 150
110 4 × Ø18 18 43.1 445
50 165 125 4 × Ø18 20 54.5 556/715
2)
80 200 160 8 × Ø18 24 82.5 611/915
2)
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 3.2 to 12.5 µm
1) DN 8 with DN 15 flanges as standard
2) Installation length in accordance with NAMUR recommendation NE 132 optionally available (order code
for "Process connection", option D2N or D6N (with groove))
Flange according to EN 1092-1 (DIN 2501), PN 40 (with DN 25 flanges)
1.4404 (F316/F316L)
Order code for "Process connection", option R2S
DN
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
E
[mm]
L
[mm]
8 115 85 4 × Ø14 18 28.5 329
15 115 85 4 × Ø14 18 28.5 329
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 3.2 to 12.5 µm
Заказывайте на сайте: www.tinnova.ru/endress_hauser/ || Эл. почта: info@tinnova.ru