Endress+Hauser Proline Promass I 300 - Page 200

Diagnostics and troubleshooting Proline Promass I 300 PROFINET
200 Endress+Hauser
Diagnostic information Remedy instructions
No. Short text
494 Switch output simulation 1 to n Deactivate simulation switch output
Measured variable status
Quality Good
Quality substatus Ok
Coding (hex) 0x80 to 0x83
Status signal C
Diagnostic behavior Warning
Influenced measured variables
–
Diagnostic information Remedy instructions
No. Short text
495 Diagnostic event simulation Deactivate simulation
Measured variable status
Quality Good
Quality substatus Ok
Coding (hex) 0x80 to 0x83
Status signal C
Diagnostic behavior Warning
Influenced measured variables
–
Diagnostic information Remedy instructions
No. Short text
496 Status input simulation Deactivate simulation status input
Measured variable status
Quality Good
Quality substatus Ok
Coding (hex) 0x80 to 0x83
Status signal C
Diagnostic behavior Warning
Influenced measured variables
–