116
WSG-1068 ENGINE
26. Use silicone gasket and sealant F6AZ-19562-
AA equivalent meeting Ford specification
WSE-M4G323-A6.
NOTE: Sealant must be removed and area
cleaned with solvent if above instructions are not
followed.
Use metal surface cleaner F4AZ-19A536-RA or
equivalent meeting Ford specification
WSEM5B292-A.
27. Remove the bolts and remove the engine
mounts.
28. Remove the bolts and nut retaining the oil filter
adapter (6881) to the cylinder block. Remove
the oil filter adapter and clean the gasket
surface.
29. Remove the bolts and the oil pump (6600).
To Next Page
Loading...
