123
WSG-1068 ENGINE
6.
CAUTION: Keep the valves and the valve
spring retainer keys (6518) in order so they can
be installed in the same positions.
NOTE: The 8-cylinder is shown. The 10-cylinder is
similar.
NOTE: Shown without camshaft for clarity.
Remove the (A) valve spring retainer keys, the (B)
valve spring retainers (6514), the (C) valve springs,
and the valves.
7. Remove the valve stem seals (6571).
8.
CAUTION: The caps must be marked for
installation in their original location or damage
to the engine may occur.
Remove the bolts, the bearing caps and the camshaft.
To Next Page
Loading...
