149
WSG-1068 ENGINE
62.
CAUTION: Do not rotate the water pump
housing once the water pump (8501) has been
positioned in the cylinder block. Damage to the
O-ring seal will occur.
Install the water pump.
1. Lubricate the new O-ring seal using Premium
Cooling Fluid E2FZ-19549-AA or equivalent
meeting Ford specification ESE-M97B44-A and
install the O-ring seal onto the water pump.
2. Position the water pump into the cylinder block.
3. Install the water pump retaining bolts.
63. Lubricate the (A) engine front cover and the (B) front
oil seal inner lip.
Use Super Premium SAE 5W30 Motor Oil XO-
5W30-QSP or equivalent meeting Ford
specification WSS-M2C153-G.
64. Use the (A) Crankshaft Seal Replacer/Aligner to
install the (B) crankshaft front seal (6700) into the
(C) engine front cover.
To Next Page
Loading...
