Engine distributors WSG-1068 - Page 72

56

WSG-1068 ENGINE
Crankshaft Front Oil Seal - Installation
1. Lubricate the (A) engine front cover (6019) and the
(B) crankshaft front seal inner lip.
 Use Super Premium SAE 5W30 Motor Oil XO-5W30-QSP or
equivalent meeting Ford specification WSS-M2C153-G.
2. Use the (A) Crankshaft Seal Replacer to install the
(B) crankshaft front seal into the (C) engine front cover.
3. Install crankshaft pulley; refer to Crankshaft Pulley
in this section.