75
WSG-1068 ENGINE
21. Lubricate the bearing caps with engine oil.
Use Super Premium SAE 5W30 Motor Oil XO- 5W30-QSP or
equivalent meeting Ford specification WSS-M2C153-G.
22. Install the bearing caps, the bolts and tighten the
bolts in the sequence shown.
23. NOTE: The timing chain is removed for clarity.
CAUTION: Mating parts must make contact to
each other within 4 minutes and connecting bolts
must be torqued within 15 minutes after applying
sealant. Failure to follow this procedure can cause
future oil leakage.
Use silicone gasket and sealant F6AZ-19562-AA or
equivalent meeting Ford specification WSE-M4G323-A6.
NOTE: Sealant must be removed and area cleaned with
solvent if above instructions are not followed.
Use metal surface cleaner F4AZ-19A536-RA or
equivalent meeting Ford specification WSE-M5B292-A.
24. Install engine front cover; refer to Engine Front Cover
in this section.
To Next Page
Loading...
