77
WSG-1068 ENGINE
6. Use the Valve Spring Compressor to compress the
valve springs (6513) and remove the camshaft roller
followers.
CAUTION: The caps must be marked for
installation in their original location or damage
to the engine may occur.
7. Remove the bolts, the camshaft bearing caps (6B280)
and the camshaft (6250) from the cylinder block (6010).
Camshaft - Installation
1. Lubricate the camshaft journals and bearing caps.
Use Super Premium SAE 5W30 Motor Oil D9AZ-
19579-A or equivalent meeting Ford specification
WSS-M2C153-G.
To Next Page
Loading...
