80
WSG-1068 ENGINE
9. Lubricate the balance shaft journals with engine oil.
Use Super Premium SAE 5W30 Motor Oil D9AZ-
19579-A or equivalent meeting Ford specification
WSS-M2C153-G.
10. Position the bearing caps in their original locations
and the bolts. Tighten the bolts in the sequence
shown.
11. Install the intake manifold; refer to Intake Manifold –
Variable Resonance Induction System (VRIS) in this
section.
12. Install the timing chains; refer to Timing Drive
Components in this section.
To Next Page
Loading...
