eno one 2/r - user manual
REV.05
23
21. REPLACEMENT/REMOVAL OF THE BOTTLE
In the event of replacement it is advisable to enter the "F.1" menu to
momentarily deactivate the thermoelectric component and thus avoid energy con-
sumption and accumulation of condensation inside the bottle compartment (P).
This process can however be avoided in the event of rapid replacement.
In case of removal (without replacement) there is no need to enter the "F.1 " menu.
For both operations follow the steps described below:
Open the door (B) and push the bot-
tle down, exerting pressure with the
hands on the base of the neck in
order to lock the bottle raising piston
(T) into the locked position.
Keep the door (B) open for the
shortest possible time in order to
avoid dispersion of the tempera-
ture of the bottle compartment (P)
and the formation of condensation.
Dry any moisture which forms on
the inside of the compartment and
on the bottles every time the door is
opened.
Remove the bottle from the straw
avoiding the leaking of drops of wine.
The straws can be reused with differ-
ent wines, after having checked the
length (para.18 ). In this case it is ad-
visable to clean the straw (para. 43 ).
When replacing the same wine it is
possible to avoid washing the pipe.
USE AND OPERATION
To Next Page
Loading...