eno one 2/r - user manual
REV.05
52
53. DECOMMISSIONING AND DEMOLITION OF THE DIS-
PENSER
-During decommissioning, it is necessary to perform a series of actions to ensure
that the Dispenser is not an obstruction, is not easily accessible and cannot be used.
-During demolition, select all the components according to their chemical character-
istics and arrange for differentiated disposal in compliance with the applicable laws
in force.
-Do not dispose of non-biodegradable products, lubricating oils or non ferrous com-
ponents (rubber, PVC, resins, etc.) into the environment. Carry out their disposal in
compliance with the applicable laws in force.
"According to Art. 26 of Legislative Decree 49/2014: "Implementation of Directive
2012/19/EU on waste electrical and electronic equipment"
The crossed bin symbol on the appliance or on its packaging indicates that the prod-
uct at the end of its life must be collected separately from other waste.
The user must therefore deliver the equipment at the end of its life to the suitable
separate waste collection centres of electronic and electrical waste.
Adequate separate collection for the future use of the equipment assigned for recy-
cling, treatment and environmentally compatible disposal helps to prevent possible
negative effects on the environment and on human health and promotes recycling
and/or reuse of the materials of which the equipment is composed.
Illegal dumping of the product by the user entails the application of administrative
sanctions provided by the laws in force.
In accordance with ISO-7000 graphical symbols used on the Dispenser
DISPOSAL
52. INFORMATION ON REPLACEMENTS COMPONENTS
• Before carrying out any intervention of replacement, turn off the gas supply
valve, switch off the power supply of the Dispenser and prevent access to all
devices that could, if activated cause unexpected danger conditions resulting in
damage to the health and safety of persons.
• Enable all the required safety devices, if provided, and assess whether it is nec-
essary to adequately inform staff and particularly those operating nearby.
• If it is ever necessary to replace worn parts, use only original spare parts.
• Do not perform interventions that could modify the operating characteristics and
safety requirements of the Dispenser and not replace components with non-orig-
inal spare parts without the manufacturer's prior written consent.
To Next Page
Loading...