EN-32 Installation and Operating Instructions - EOS Compact DC/HC
EN Installation
Mounting the heater sensor in the cabin
1 Determine a suitable location for the installation.
The heater sensor must be installed on the cabin ceiling above the
sauna heater. It is installed in observance of the following distances
from the cabin wall, depending on the cabin size.
2 Drill a hole in the cabin ceiling for the cable.
3 Route the sensor cable through the hole.
Attach a taught wire to the cable as needed.
A Cabins smaller than 2x2 m:
Distance from wall 19 cm
B Cabins larger than 2x2 m:
Distance from wall 35 cm
To Next Page
Loading...
Need help?
General
