eove EO-70 - Accessories Compatible with EO-70

33
Accessories Compatible with EO-70
The EO-70 device is compatible with the following accessories:
 SPO2 Cable (EO-SPO2CBL)
 Remote control pedal (EO-70FSWITCH)
The EO-70 can be used with 22 mm diameter breathing circuits complying with CE regulations.
WARNING
Before using any accessory, always carefully read the accompanying user Manual.
The
EO
-
70
d
evice should only be used with accessories recommended by EOVE. Connection
of other accessories could result in patient injury or damage to the device.
WARNING
Do not use electrically conductive or anti
-
static air tubing.
Due to their resistance to flow, accessories such as filters, many decrease patient
pressure during inspiration and increase patient pressure during exhalation.
WARNING
To prevent the risk of cross
-
contamination, an antibacterial filter is mandatory if the device
is to be used on multiple patients.
Regularly check the antibacterial filter for signs
of moisture or other
contaminants.
Failure to do so could result in increased system resistance and/or inaccuracies in pressures
measurements.
Only use antibacterial filters that comply with the relevant safety standards, including ISO
23328-1 and ISO 23328-2.
CAUTION
The antibacterial filter must be used and replaced according to the manufacturer's
specifications.