37
Power Connections
Beware of electrocution. Do not immerse the device, power supply or power cord in wate
Make sure the power cord and plug are not damaged and the equipment is in good
condition.
Keep the power cord and device away from hot
do not use in the vicinity of flammable anesthetics.
The EO-70 device can be used with two different power sources:
Mains power
Internal battery
For information on power supplies and sources see the technical specifications.
Connecting to mains power
Ensure that the power cord does not pose a tripping or choking h
Ensure that the home AC mains supply and connections are safe and comply with the
applicable regulations.
Ensure that the device and its power charger are placed in a way that allows an easy
disconnection from the mains.
To connect to mains power:
1. Connect the DC plug of the supplied external power supply unit to the rear of the EO 70
module or docking station. Ensure the connection is correctly aligned. Secure the connection
by screwing the connector firmly in place.
2. Plug the other end of the power cord into the power outlet.
Do not twist or tug the power cord or the outer housing of the connector.
Complete assembly with accessories
To Next Page
Loading...