Need help?Do you have a question about the Epcom S08 S Series and is the answer not in the manual?
Procedure for safely starting up and shutting down the DVR unit.
Guide to the initial setup wizard for device configuration.
How to customize live view settings like output, dwell time, and audio.
Setting video encoding parameters for main and sub-streams.
Setting up schedules for automatic recording based on time.
Configuring motion detection areas, sensitivity, and recording triggers.
Steps to back up recorded video files to USB devices using various search methods.
Configuring motion detection parameters, areas, sensitivity, and schedules.
Procedure for initializing a newly installed hard disk drive (HDD).
General| Channels | 8 |
|---|---|
| Operating System | Embedded Linux |
| Model | S08 S Series |
| Hard Drive Support | 1 SATA interface |
| Network Interface | RJ45 10/100Mbps |
| Power Supply | 12 VDC |
| Video Output | 1 HDMI, 1 VGA |
| Audio Output | 1 channel |
| Remote Viewing | Yes |
| Mobile Support | iOS, Android |
| USB Interface | 2 x USB 2.0 |
To Next Page
