POWERED BY
79
SERIESSERIES
Figure 8.6 Copy Settings of Motion Detection
8.3 Detecting Video Loss
Purpose:
Detect video loss of a channel and take alarm response action(s).
Steps:
1. Enter Video Loss interface of Camera Management.
Menu> Camera> Video Loss
Figure 8.12 Video Loss Setup Interface
2. Select a channel you want to detect.
3. Check the checkbox of Enable Video Loss Alarm.
4. Click the icon of Handling to enter the Handling interface.
5. Set the arming schedule and alarm response actions. Please refer to Step4 and Step5 of Chapter 8.1 Setting Motion Detec-
tion.
To Next Page
Loading...
