1 - 17
Chapter 1 Troubleshooting
Epson AcuLaser C2900N
Revision B
Confidential
071 100
Jam at Tray 1
Check Tray 1
Open Front Cover
<IOT Tray1 Misfeed JAM>
The Regi Sensor is not turned ON within the specified time
after feeding a paper from Tray 1.
FIP-1.30
072
This code is given when the Option 250 Sheet Feeder is installed.
100
Jam at Tray 2
Check Tray 2
Open Front Cover
<IOT Tray2 Misfeed JAM>
The Paper Path Sensor of Tray 2 is not turned ON within the
specified time after feeding a paper from Tray 2.
FIP-1.31
101
Jam at Tray 2
Open Tray 2
Open Front Cover
<IOT Feeder 2 JAM>
A jam has been detected between the Regi Sensor and the
Paper Sensor of Tray 2.
FIP-1.32
This code is given when the Optional 250-Sheet Feeder is installed.
215
250 Feeder Error
Restart Printer
Error 072-215
Restart Printer
<IOT Feeder Configuration Failure>
Option Sheet Feeder Configuration error is detected.
FIP-1.33
216
Motor Error
Restart Printer
Error 072-216
Restart Printer
<Option Feeder Motor Failure>
Option Feeder Motor failure is detected.
FIP-1.34
900
Jam at
Tray 1 or 2
Open Tray 1 or 2
Open Front Cover
<IOT Remain Option Feeder JAM>
The paper remains at the Paper Path Sensor of Tray 2.
FIP-1.35
075
101
Jam at Front
Cover
Open Front Cover
and Remove Paper
<IOT SSI Insert JAM>
SSI No Paper Sensor detect when a paper is inserted from
SSI.
FIP-1.36
102
Chk Manual Feed
Remove Paper
Open and close
Front Cover
<IOT SSI Paper Pullout JAM>
Though it tried to feed a paper from SSI, the paper was not
loaded or it was pulled out forcibly from SSI.
FIP-1.36
923
Reseat paper
of Manual Feed
<Waiting for reseat paper of SSI>
Wait for the paper on SSI to be reseated.
FIP-1.36
077
100
Jam at Front
Cover
Open Front Cover
and Remove Paper
<IOT Regi On early JAM>
The paper remains at the paper transfer path between the
Tray 1 and the Regi Sensor.
FIP-1.37
101
Jam at Front
Cover
Open Front Cover
and Remove Paper
<IOT Regi OFF Jam>
The paper does not pass through the Regi Sensor within the
specified time.
FIP-1.38
Status
Code
Error Message
Status Contents
FIP to be
referred
LCD
To Next Page
Loading...
