Epson AL-C300 Series User Manual

Item Explanation
020 Special Adjusts the print quality for special paper according to the paper type.
Settings (default in bold):
0: Plain paper
1: Coated paper 1
2: Coated paper 2
051 Feed Offset Do this adjustment after you have eliminated the variation between the paper sources by
055 Feed Reg1 MP/059 Feed Reg1 C1/063 Feed Reg1 C2.
This function adjusts the vertical position at which to start printing. The position moves
lower on the sheet of paper as the value increases. This setting is used when doing
single-sided printing or printing on the back side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
052 Scan Offset Do this adjustment after you have eliminated the variation between the paper sources by
056 Scan Reg1 MP/060 Scan Reg1 C1/064 Scan Reg1 C2.
This function adjusts the horizontal position at which to start printing. The position moves
to the right of the sheet of paper as the value increases. This setting is used when doing
single-sided printing or printing on the back side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
053 Feed Offset2 Do this adjustment after you have eliminated the variation between the paper sources by
057 Feed Reg2 MP/061 Feed Reg2 C1/065 Feed Reg2 C2.
This function adjusts the vertical position at which to start printing. The position moves
lower on the sheet of paper as the value increases. This setting is used when printing on
the front side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
054 Scan Offset2 Do this adjustment after you have eliminated the variation between the paper sources by
058 Scan Reg2 MP/062 Scan Reg2 C1/066 Scan Reg2 C2.
This function adjusts the horizontal position at which to start printing. The position moves
to the right of the sheet of paper as the value increases. This setting is used when printing
on the front side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
055 Feed Reg1 MP
059 Feed Reg1 C1
063 Feed Reg1 C2
Adjusts the vertical position at which to start printing and eliminate the variation between
the paper sources. The position moves lower on the sheet of paper as the value increases.
This setting is used when feeding paper from the MP tray, C1, or C2 for single-sided
printing or printing on the back side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
056 Scan Reg1 MP
060 Scan Reg1 C1
064 Scan Reg1 C2
Adjusts the horizontal position at which to start printing and eliminate the variation
between the paper sources. The position moves to the right of the sheet of paper as the
value increases. This setting is used when feeding paper from the MP tray, C1, or C2 for
single-sided printing or printing the back side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
AL-C300 Series User's Guide
Appendix
91

Epson AL-C300 Series Specifications

General

Brand	Epson
Model	AL-C300 Series
Category	Printer
Language	English