Epson CMOS 32-Bit Single Chip Microcomputer S1C33L03 User Manual

II CORE BLOCK: BCU (Bus Control Unit)
S1C33L03 FUNCTION PART EPSON B-II-4-17
A-1
B-II
BCU
Bus Clock
The bus clock is generated by the BCU using the CPU system clock output from the clock generator.
Figure 4.17 shows the clock system.
High-speed (OSC3)
oscillation circuit
CLKCHGCLKDT[1:0]
PLLS[1:0] pins
#X2SPD pin
To CPU
OSC3_CLK
PLL_CLK
A
CPU_CLK
BCU_CLK
CPU_CLK
OSC3_CLK
PLL_CLK
Bus clock
PLL
Low-speed (OSC1)
oscillation circuit
CLG
BCU
1/1 or 1/2
1/1–1/8
BCLKSEL[1:0]
SDRENA
SD_CLK
SDRAMC
1/1 or 1/2
Refresh
counter
BCLK pin
PLL_CLK and CPU_CLK
BCU_CLK
SD_CLK (When #X2SPD = "1")
OSC3_CLK (PLL: off)
PLL_CLK (PLL: x2 mode)
PLL_CLK (PLL: x4 mode)
A
CPU_CLK (CLKDT = 1/1)
CPU_CLK (CLKDT = 1/2)
CPU_CLK (CLKDT = 1/4)
CPU_CLK (CLKDT = 1/8)
CPU_CLK
BCU_CLK (#X2SPD = "1", x1 speed mode)
BCU_CLK (#X2SPD = "0", x2 speed mode)
(when the CPU system clock source is OSC3)
∗1
∗1 Access to the internal RAM
∗2 Access to the external memory (other than SDRAM)
∗3 Access to the SDRAM
∗1
∗1
∗1
∗2 ∗1 ∗2
∗2
∗3 ∗2 ∗1
∗1 ∗2
#SDCEx
CPU_CLK
BCU_CLK
SD_CLK (SDRCLK = "1")
SD_CLK (SDRCLK = "0")
SDCKE
Self refresh
SD_CLK (When #X2SPD = "0")
∗3 ∗2 ∗1
#SDCEx
CPU_CLK
BCU_CLK
SD_CLK (SDRCLK = "1")
SD_CLK (SDRCLK = "0")
SDCKE
Self refresh
Figure 4.17 Clock System

Epson CMOS 32-Bit Single Chip Microcomputer S1C33L03 Specifications

General

Brand	Epson
Model	CMOS 32-Bit Single Chip Microcomputer S1C33L03
Category	Computer Hardware
Language	English