EasyManuals Logo

Epson CMOS 32-Bit Single Chip Microcomputer S1C33L03 User Manual

Epson CMOS 32-Bit Single Chip Microcomputer S1C33L03
631 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #546 background imageLoading...
Page #546 background image
VII LCD CONTROLLER BLOCK: LCD CONTROLLER
B-VII-2-12 EPSON S1C33L03 FUNCTION PART
Grayscale-mode look-up tables
In grayscale mode, the LCD controller uses only the green look-up table. For display in grayscale mode,
select the data to be written to the look-up table from the 16 gray levels represented by 4 bits. The data 0x0,
0x1, 0x8, and 0xF represent black, 93.75% gray, 50% gray, and white, respectively. The differences in
configuration between display modes are shown below.
(1) 1-bpp (2-gray-level) mode
Use the first two entries of the green look-up table. Select two pieces of data from the 16 gray levels, and
write them to the respective entries. The data in entry 0 is output for pixel data "0", and the data in entry 1 is
output for pixel data "1". For monochrome display, write 0x0 to entry 0 and 0xF to entry 1 before using the
LCD panel.
1-bit pixel data
"0"
"1"
4-bit display data
Green look-up tableIndex
Unused
0
1
2
:
15
4-bit grayscale data for pixel data "0"
4-bit grayscale data for pixel data "1"
Figure 2.9 Look-up Table in 1-bpp (2-Gray-Level) Mode
Table 2.6 shows an example of the basic data setting.
Table 2.6 Example of Look-up-Table Settings in 1-bpp (2-Gray-Level) Mode
Index R look-up table G look-up table B look-up table
0000
100xF0
2–15 0 0 0
(2) 2-bpp (4-gray-level) mode
Use the first four entries of the green look-up table. Select four pieces of data from the 16 gray levels, and
write them to the respective entries. The data in entry 0 is output for pixel data "00", and the data in entry 3 is
output for pixel data "11".
4-bit grayscale data for pixel data "00"
4-bit grayscale data for pixel data "01"
4-bit grayscale data for pixel data "10"
4-bit grayscale data for pixel data "11"
2-bit pixel data
"00"
"01"
"10"
"11"
4-bit display data
Green look-up tableIndex
Unused
0
1
2
3
4
:
15
Figure 2.10 Look-up Table in 2-bpp (4-Gray-Level) Mode
Table 2.7 shows an example of the basic data setting.
Table 2.7 Example of Look-up-Table Settings in 2-bpp (4-Gray-Level) Mode
Index R look-up table G look-up table B look-up table
0000
1050
200xA0
300xF0
4–15 0 0 0

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson CMOS 32-Bit Single Chip Microcomputer S1C33L03 and is the answer not in the manual?

Epson CMOS 32-Bit Single Chip Microcomputer S1C33L03 Specifications

General IconGeneral
BrandEpson
ModelCMOS 32-Bit Single Chip Microcomputer S1C33L03
CategoryComputer Hardware
LanguageEnglish

Related product manuals