Solving Sound Problems
112
If there is no sound or the volume is too low, try the following steps until the
problem is solved.
a
Adjust the projector's volume settings using the or button on
the remote control.
b
Check the cable connection between the projector and your video
source.
c
Check the following settings on the projector:
• Press the button on the remote control to resume video and
audio if they were temporarily stopped.
• Press the button on the remote control to unmute audio if it was
muted.
d
Check the following settings on your video equipment:
• Check your video source to make sure the volume is turned up and
the audio output is set for the correct source.
• Set the connected device to PCM output.
• When you are connecting the projector to a Mac using an HDMI
cable, make sure your Mac supports audio through the HDMI port.
gg Related Links
• "Projector Feature Settings - Settings Menu" p.81
To Next Page
Loading...
Need help?
General