Adjusting the Image Height
36
If you are projecting from a table or other flat surface and the image is too
high or low, you can adjust the image height using the projector's adjustable
foot.
The larger the angle of tilt, the harder it becomes to focus. Locate the
projector so that it only needs to be tilted at a small angle.
a
Turn on the projector and display an image.
b
Press the foot release lever to extend and retract the front adjustable
foot.
The foot extends from the projector.
You can adjust the position up to 12 degrees.
c
Release the lever to lock the foot.
If the projected image is unevenly rectangular, you need to adjust the image
shape.
gg Related Links
• "Image Shape" p.37
To Next Page
Loading...
Need help?
General