Epson CO-FD01 User Manual

Turning On the Projector
27
Turn on the computer or video device you want to use after you turn on the
projector.
a
Connect the device to the projector.
b
Connect the power cord to the projector's power inlet and plug it into
an electrical outlet.
c
Press the power button on the projector or remote control to turn on
the projector.
The status indicator flashes blue as the projector warms up. Once the
projector is warmed up, the status indicator stops flashing and turns
blue.
d
Turn on the connected device.
e
Try the following if you do not see a projected image.
• Turn on the connected computer or video device.
• Change the screen output from the computer when using a laptop
computer.
• Insert a DVD or other video media, and press play (if necessary).
• Press the button on the remote control to detect the source.
• If the Home screen is displayed, select the source you want to project.

Epson CO-FD01 Specifications

General

Brand	Epson
Model	CO-FD01
Category	Projector
Language	English