Zooming Images (E-Zoom)
61
You can zoom into an area of the projected image and enlarge it on the
screen.
a
Press the button on the remote control.
You see a crosshair on the screen indicating the center of the zoom
area.
b
Use the following buttons on the remote control to adjust the zoomed
image:
• Use the arrow buttons to position the crosshair in the image area you
want to zoom into. To move the crosshair diagonally, press any pair
of adjacent arrow buttons at the same time.
• Press the button repeatedly to zoom into the image area. Press
and hold the button to zoom in more quickly.
• To pan around the zoomed image area, use the arrow buttons.
• To zoom out of the image, press the button.
• To return to the original image size, press .
The enlarged image is projected and the enlargement ratio is displayed
on the screen.
You can enlarge the selected area to between one to four times in 25
incremental steps.
When projecting images from an Epson document camera using a USB
connection, you can enlarge the selected area from one to eight times its size
in 57 incremental steps.
To Next Page
Loading...
Need help?
General