Displaying a Test Pattern
35
You can display a test pattern to adjust the projected image without
connecting a computer or video device.
a
• The test pattern's shape is determined by the Screen Type setting. Be
sure to set the correct screen type before adjusting with the test
pattern.
s Settings > Installation > Screen > Screen Type
• To set menu items that cannot be set while the test pattern is being
displayed or to fine-tune the projected image, project an image from
the connected device.
a
Turn on the projector.
b
Press the button on the remote control.
c
Select the Settings menu and press [Enter].
d
Select Installation > Pattern > Test Pattern, and press [Enter].
The test pattern is displayed.
e
Adjust the image as necessary by adjusting the focus or changing the
projector position.
f
Press to clear the test pattern.
To Next Page
Loading...
