Epson CO-FD01 User Manual

Image Shape
38
gg Related Links
• "Projector Feature Settings - Settings Menu" p.81
Correcting the Image Shape with Quick Corner
You can use the projector's Quick Corner setting to correct the shape and size
of an image that is unevenly rectangular.
a
Turn on the projector and display an image.
b
Press the button on the remote control.
c
Select the Settings menu and press [Enter].
d
Select Installation > Keystone and press [Enter].
e
Select Quick Corner and press [Enter]. Then press [Enter] again if
necessary.
You see the area selection screen.
f
Use the arrow buttons to select the corner of the image you want to
adjust. Then press [Enter].
a
To reset the Quick Corner corrections, hold down for about
two seconds while the area selection screen is displayed, and then
select Yes.
g
Press the arrow buttons to adjust the image shape as necessary.
To return to the area selection screen, press [Enter].

Epson CO-FD01 Specifications

General

Brand	Epson
Model	CO-FD01
Category	Projector
Language	English