Image Aspect Ratio
44
The projector can display images in different width-to-height ratios called
aspect ratios. Normally, the input signal from your video source determines
the image's aspect ratio. However, for certain images you can change the
aspect ratio to fit your screen.
If you always want to use a particular aspect ratio for a certain video input
source, you can select it using the projector's Image menu.
gg Related Links
• "Changing the Image Aspect Ratio" p.44
• "Available Image Aspect Ratios" p.44
• "Image Quality Settings - Image Menu" p.79
Changing the Image Aspect Ratio
You can change the aspect ratio of the displayed image.
a
Turn on the projector and display an image.
b
Press the button on the remote control.
c
Select the Image menu and press [Enter].
d
Select Aspect and press [Enter].
e
Select one of the available aspect ratios for your input signal and press
[Enter].
f
Press to exit the menus.
a
The available aspect ratio setting varies depending on the input signal.
gg Related Links
• "Image Quality Settings - Image Menu" p.79
Available Image Aspect Ratios
You can select the following image aspect ratios, depending on the input
signal from your image source.
To Next Page
Loading...
Need help?
General