Projector Setup Settings - ECO Menu
90
Settings on the ECO menu let you customize projector functions to save
power.
When you select a power-saving setting, a leaf icon appears next to the menu
item.
Setting Options Description
Light Output Normal
Low (Eco)
Selects the brightness mode of the
projector lamp. You cannot select
settings when you use your projector at
high altitude or in locations subject to
high temperatures.
Normal: sets maximum lamp brightness.
Low (Eco): reduces lamp brightness and
fan noise, and saves power and lamp life.
Sleep Mode On
Off
Automatically turns off the projector
after an interval of inactivity (when On).
Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode.
A/V Mute Timer On
Off
Automatically turns off the projector
after 30 minutes if A/V Mute is enabled
(when On).
Setting Options Description
Standby Mode Communication
On
Communication
Off
Communication On indicates that the
projector can be monitored over a
network when the projector is in standby
mode. Enable this setting to allow the
following operations to occur when the
projector is in standby mode:
• Monitor and control the projector over
a network
a
• When the A/V Mute Timer setting is enabled, the lamp uses less
power when A/V Mute is activated.
To Next Page
Loading...
Need help?
General