Epson CO-FD01 - Page 50

Wireless Network Connection
50
d
Select the Basic menu and press [Enter].
e
Select the basic options as necessary.
• Projector Name lets you enter a name up to 16 alphanumeric
characters long to identify the projector over the network.
• Remote Password lets you enter a password up to 32 alphanumeric
characters long to access the projector using the Basic Control. (User
name is EPSONREMOTE; default password is the projector's serial
number.)
• Web Control Password lets you enter a password up to 32
alphanumeric characters long to access the projector over the Web.
(User name is EPSONWEB; default password is the projector's serial
number.)
• Moderator Password lets you enter a four-digit number password
for accessing the projector as a moderator using Epson iProjection.
(No password is set by default.)
• Projector Keyword lets you turn on a security password to prevent
access to the projector by anyone not in the room with it. You must
enter a displayed, randomized keyword from a computer using
Epson iProjection to access the projector and share the current
screen.
• Display Keyword lets you select whether to display a projector
keyword on the projected image when accessing the projector using
Epson iProjection.
• Display LAN Info. lets you set the display format for the projector's
network information.
a
Use the displayed keyboard to enter numbers and characters.
Press the arrow buttons on the remote control to highlight
characters and press [Enter] to select them.
f
Select the Wireless LAN menu and press [Enter].
g
Select the Connection Mode setting.
• Quick lets you connect to multiple smartphones, tablets, or
computers directly using wireless communication.
• Advanced lets you connect to smartphones, tablets, or computers
over a wireless network access point.
h
If you selected the Advanced connection mode, select Search Access
Point to select the access point you want to connect to.