What to do if my Epson Disc Producer PP-100 displays 'Invalid disc error'?
If your Epson Disc Duplicator shows an invalid disc error, check that the disc is blank and not damaged. Also, in the EPSON Total Disc Setup Properties dialog box, select the disc type that is the same as the discs loaded in the stacker.
What to do if my Epson Disc Duplicator displays 'Disc transfer error'?
If your Epson Disc Duplicator displays a 'Disc transfer error', turn off the product and remove the disc. If the same error occurs frequently, contact your dealer.
What to do if my Epson Disc Duplicator has banding?
If you notice banding in the printouts from your Epson Disc Duplicator, run the head cleaning utility to clear any clogged ink nozzles.
Why did the lights come on and then go out on my Epson Disc Producer PP-100?
If the lights came on and then went out on your Epson Disc Duplicator, the product’s voltage may not match the outlet rating. Turn off the product and unplug it immediately. Then check the label on the back of the product.
What to do if my Epson Disc Duplicator shows 'Stacker 1 is not correctly inserted'?
If your Epson Disc Duplicator displays 'Stacker 1 is not correctly inserted', make sure stacker 1 is correctly inserted.
What to do if the printed side of my Epson Disc Producer PP-100 Disc Duplicator is smeared or scuffed?
If the printed side from your Epson Disc Duplicator is smeared or scuffed, select the appropriate disc size setting in the printer driver.
What to do if my Epson Disc Producer PP-100 Disc Duplicator prints with incorrect margins?
If your Epson Disc Duplicator prints with incorrect margins, check the Inner/Outer Diameter settings in your application.
What to do if my Epson Disc Producer PP-100 displays 'Product maintenance error'?
If your Epson Disc Duplicator displays a 'Product maintenance error', turn off the product and contact your dealer.
What to do if my Epson Disc Producer PP-100 displays 'Ink cartridge not fully inserted'?
If your Epson Disc Duplicator displays 'Ink cartridge not fully inserted', check ink cartridges and make sure they are all fully inserted.
What to do if my Epson Disc Duplicator displays 'The ink has reached its replacement time or it is not installed correctly'?
If your Epson Disc Duplicator indicates that the ink has reached its replacement time or it is not installed correctly, replace the ink cartridge or reinstall it.
General| Printing Technology | Inkjet |
|---|---|
| Disc Capacity | 100 discs |
| Print Resolution | 1440 x 1440 dpi |
| Interface | USB 2.0 |
| Dimensions | 377 x 493 x 348 mm |
| Number of Drives | 1 |
| Supported Disc Formats | CD, DVD |
| Operating System Compatibility | Windows XP, Windows Vista, Windows 7 |
| Print Speed | Approximately 60 discs/hour |
To use this product safely, read this guide and other instruction guides before operating.
Important warnings and precautions regarding the product's power cord and electrical connections.
General warnings and precautions for operating the product safely and preventing damage.
Guides through setting up stacker, drive, and printer configurations via the utility.
Addresses common issues with power, control panel, and basic product operation.
Troubleshoots issues related to disc movement and transfer between stackers and drives.
Addresses issues related to the quality and accuracy of label printing.
Explains how to interpret control panel lights to diagnose product errors.
To Next Page
