To Next Page
G
gordonsandraAug 29, 2025
Why is my Epson Disc Producer PP-100 printing blurry or smeared?
- WwoodleeAug 29, 2025
If your Epson Disc Duplicator is producing blurry or smeared printouts, run the head cleaning utility.
Why is my Epson Disc Producer PP-100 printing blurry or smeared?
If your Epson Disc Duplicator is producing blurry or smeared printouts, run the head cleaning utility.
What to do if my Epson Disc Duplicator has banding?
If you notice banding in the printouts from your Epson Disc Duplicator, run the head cleaning utility to clear any clogged ink nozzles.
What to do if my Epson Disc Producer PP-100 prints with a slight slant?
If your Epson Disc Duplicator's printouts have a slight slant, run the nozzle check, print head cleaning, and print head alignment utilities.
What to do if my Epson Disc Producer PP-100 Disc Duplicator shows 'Ink Low'?
If your Epson Disc Duplicator indicates low ink, you should obtain a replacement ink cartridge. Check the ink cartridge status to determine which cartridge needs replacing.
Why is my Epson Disc Producer PP-100 printing too slow?
If your Epson Disc Duplicator is printing too slowly, make sure the label type selected in the printer driver is appropriate for the type of disc loaded in the product.
What to do if my Epson Disc Producer PP-100 shows 'Multiple feed error'?
If your Epson Disc Duplicator displays a multiple feed error: * Open the disc cover. * Remove the discs from both the drive tray and the printer tray. * Fan the discs inside the input stacker to avoid disc sticking. * Insert other discs into the input stacker. * Close the disc cover and publish disc again. If the same error occurs frequently, contact your dealer.
What should I do if my Epson Disc Producer PP-100 is not feeding discs?
If a disc does not feed from the input stacker on your Epson Disc Duplicator: * Open the disc cover. * Remove blank discs from the stacker. * Fan a stack of discs to prevent them from sticking together. * Insert discs back in the stacker. * Close the disc cover. * Publish disc again.
What to do if my Epson Disc Duplicator has vertical misalignment?
If you are experiencing vertical misalignment with your Epson Disc Duplicator, run the print head alignment utility.
What does it mean if my Epson Disc Producer PP-100 says 'Stacker 1 is empty'?
If your Epson Disc Duplicator indicates that Stacker 1 is empty, load discs into stacker 1.
What to do if my Epson Disc Producer PP-100 says 'Stacker 2 is empty'?
If your Epson Disc Duplicator displays 'Stacker 2 is empty', load discs into stacker 2.
General| Printing Technology | Inkjet |
|---|---|
| Disc Capacity | 100 discs |
| Print Resolution | 1440 x 1440 dpi |
| Interface | USB 2.0 |
| Dimensions | 377 x 493 x 348 mm |
| Number of Drives | 1 |
| Supported Disc Formats | CD, DVD |
| Operating System Compatibility | Windows XP, Windows Vista, Windows 7 |
| Print Speed | Approximately 60 discs/hour |
To use this product safely, read this guide and other instruction guides before operating.
Important warnings and precautions regarding the product's power cord and electrical connections.
General warnings and precautions for operating the product safely and preventing damage.
Guides through setting up stacker, drive, and printer configurations via the utility.
Addresses common issues with power, control panel, and basic product operation.
Troubleshoots issues related to disc movement and transfer between stackers and drives.
Addresses issues related to the quality and accuracy of label printing.
Explains how to interpret control panel lights to diagnose product errors.
