Epson DiscProducer PP-100N Administrator's Guide

77
Troubleshooting
Print tray
open/close error
-When the printer tray does not come out-
Turn off the power, and then turn it on again. If the drive trays
still does not come out, see “Printer tray does not come out”
on page 92 in this guide. If the same error message appears
again, repair is required. Please contact Customer Support.
-When the printer tray does not close-
Remove any remaining discs, turn off the power, and then
turn on the power again. If the same error message still
appears, repair is required. Please contact Customer
Support.
Printer maint.
error
Repair is required.
Please contact Customer Support.
Replace ink
(C,LC,LM,M,Y,K)
The ink in the cartridge is out.
Replace the cartridge of the displayed color. (See
“Changing the Ink Cartridge” in the PP-100N User’s Guide.
Replace inkpad It is time to replace the ink pad.
Please contact Customer Support. The ink pad cannot be
replaced by the customer.
Stacker 3
installed
Remove Stacker 3, and close the disc cover. Stacker 3 is not
used in Standard Mode or External Output Mode (when
Stacker 4 is set as the output stacker).
Stacker 3
not installed
Load Stacker 3, and close the disc cover. Stacker 3 is used in
Batch Mode or External Output Mode (when Stacker 3 is set
as the output stacker)
Stacker 4 full The initialization operation cannot be performed because
Stacker 4 is full.
Remove the discs from Stacker 4.
Stacker 4 open Close Stacker 4.
Stacker full
ST2, ST3, ST4
The disc cannot be ejected because the output stacker is
full.
Remove the discs from the output stacker (Stacker 2, Stacker
3, or Stacker 4).
Too many discs
ST1, ST2, ST3
Remove excess discs so that the height of the discs in the
indicated stacker is below the red line of the stacker, and
then close the disc cover.
Transferred disc
detection error
A disc could not be detected after transfer to a printer or
drive. Turn off the power, and then turn it on again. If the
same error message still appears, repair is required. Please
contact Customer Support.
Error Message Remedy
Notification
Sound

Epson DiscProducer PP-100N Specifications

General

Capacity	50 discs
Interface	Ethernet
Product color	Black, Grey
Printing colors	Black, Cyan, Light cyan, Light magenta, Magenta, Yellow
Country of origin	China
Quantity per pack	1 pc(s)
Media types supported	CD-R, DVD-R, DVD+R, DVD-R DL, DVD+R DL
Optical disc diameter	120 mm
Publishing speed (CD)	30 discs/hour
Publishing speed (DVD)	17 discs/hour
Number of CD/DVD drives	2
Compatible operating systems	Windows 7, Windows 8 (32/64 bit), Windows Server 2003 (32/64bit), Windows Server 2008 (32/64bit), Windows Server 2012 (64bit), Windows Vista, Windows XP
Print speed (speed mode)	60 discs/hour
Print speed (quality mode)	42 discs/hour
Print resolution (speed mode)	1440 x 1440 DPI
Print resolution (quality mode)	1440 x 720 DPI
CD write speed	40 x
DVD-R write speed	12 x
Ethernet LAN (RJ-45) ports	1
Ethernet LAN	Yes
Pallet width	800 mm
Pallet height	1011 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	6 pc(s)
Quantity per pallet layer	2 pc(s)

Weight and Dimensions

Package depth	725 mm
Package height	525 mm
Package weight	29200 g
Dimensions (WxDxH)	730 x 530 x 522 mm