EasyManuals Logo

Epson DiscProducer PP-100N Administrator's Guide

Epson DiscProducer PP-100N
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
76
Internal
autoloader error
Perform the procedure below.
1. Turn off the power.
2. Open the disc cover, and check if any dust or foreign
objects are inside.
3. Turn on the power.
If the same error message still appears, repair is required.
Please contact Customer Support.
Invalid
state error
Turn off the power, and then turn it on again. If the same error
message still appears, repair is required. Please contact
Customer Support.
No disc
ST1, ST2
Load discs into the input stacker (Stacker 1 or Stacker 2).
(See “Disc Loading” in the PP-100N User’s Guide.)
No ink cartridge
(C,LC,LM,M,Y,K)
The ink cartridge of the displayed color is not installed, or is
not installed correctly.
Correctly install the cartridge of the displayed color. (See
“Changing the Ink Cartridge” in the PP-100N User’s Guide.)
No stacker
ST1, ST2, ST3
Load the displayed stacker, and close the disc cover. (See
“Installing the stackers” on page 24 in this guide.)
Non-standard ink
Continue?
To use the ink cartridge, press the button (Yes). To
change to a Epson brand ink cartridge, press the CANCEL
button (No), and change the ink cartridge.
Use of non-Epson brand ink cartridges is not recommended.
Use of non-Epson brand ink cartridges can result in
problems that will not be covered by the warranty.
Epson cannot guarantee the quality and reliability of non-
Epson brand products. Repairs for any damage or
breakdown of this product due to the use of non-Epson
brand products will not be free of charge even if the
warranty period is still valid.
This product performs color adjustment based on use of
Epson brand ink cartridges. Use of non-Epson brand ink
products can adversely affect the printing quality and
prevent the product from realizing its maximum
performance.
See “Changing the Ink Cartridge” in the PP-100N User’s
Guide for the ink cartridge changing procedure.
Error Message Remedy
Notification
Sound

Table of Contents

Other manuals for Epson DiscProducer PP-100N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson DiscProducer PP-100N and is the answer not in the manual?

Epson DiscProducer PP-100N Specifications

General IconGeneral
Capacity50 discs
InterfaceEthernet
Product colorBlack, Grey
Printing colorsBlack, Cyan, Light cyan, Light magenta, Magenta, Yellow
Country of originChina
Quantity per pack1 pc(s)
Media types supportedCD-R, DVD-R, DVD+R, DVD-R DL, DVD+R DL
Optical disc diameter120 mm
Publishing speed (CD)30 discs/hour
Publishing speed (DVD)17 discs/hour
Number of CD/DVD drives2
Compatible operating systemsWindows 7, Windows 8 (32/64 bit), Windows Server 2003 (32/64bit), Windows Server 2008 (32/64bit), Windows Server 2012 (64bit), Windows Vista, Windows XP
Print speed (speed mode)60 discs/hour
Print speed (quality mode)42 discs/hour
Print resolution (speed mode)1440 x 1440 DPI
Print resolution (quality mode)1440 x 720 DPI
CD write speed40 x
DVD-R write speed12 x
Ethernet LAN (RJ-45) ports1
Ethernet LANYes
Pallet width800 mm
Pallet height1011 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pallet6 pc(s)
Quantity per pallet layer2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Package depth725 mm
Package height525 mm
Package weight29200 g
Dimensions (WxDxH)730 x 530 x 522 mm

Related product manuals