EB-E01 series Disassembly and Assembly INTERNAL USE ONLY
SEIKO EPSON 108 Revision A
EH-TW740
1. See Flowchart (p70) and remove all parts up to the component below from
the projector.
MA Board Assy (p100)
2. Remove the one screw ( ), the three screws ( ), and remove the "MA
Frame" from the "MA Board (Assy)".
3. Remove the two screws ( ) and remove the "IF Board" from the "MA
Board (Assy)".
MA Frame
MA Board (Assy)
IF Board
C.B.SCREW,3X6,F/NI
C.P.(S-P1)SCREW,2.5X6,F/ZN-3C
To Next Page
Loading...
