Epson EB-E10 - Page 172

EB-E01 series Appendix INTERNAL USE ONLY
SEIKO EPSON 172 Revision A
AS MENU: 1ST PAGE
The general operational history of the projector is displayed. The contents
displayed on the screen vary depending on the input source.
 PC/HDMI
No. Item
1 Current input source
2 Set value and detected value of the input signal
3 Horizontal/Vertical frequency
4 Horizontal/Vertical synchronization polarity
5 Synchronization mode
6 Detected computer mode
7 Total lamp operation time
8 Lamp operation time (converted into low brightness operation)
9
Lamp operation time of each brightness
3D: 3D image
H: High-intensity mode
M: Low noise mode
L: Low-intensity mode
UL: Ultra-low-intensity mode
10 Lamp replacement times
11 Lamp ON/OFF times
12 Destination
13 Type of optical engine
14 Serial number