Rear
Name Function
A
Audio-L/R port
Inputs audio from equipment connected to the Computer
port, the S-Video port, or the Video port.
B
Video port
Inputs composite video signals from video sources.
By using a splitter, you can input signals to the Video port
for the commander and the receiver.
C
Power inlet
Connects the power cord to the projector.
s "From Installation to Projection" p.32
D
USB(TypeA) port
This cannot be used on the receiver.
E
USB(TypeB) port
Connects a USB cable to the commander's USB(TypeA)
port (
). This is used to control receiver operations from
the commander.
Name Function
F
HDMI port
Inputs video signals from HDMI compatible video
equipment and computers.
By using a splitter, you can input signals to the HDMI port
for the commander and the receiver.
This projector is compatible with
HDCP
g
.
G
RS-232C port
This cannot be used on the receiver.
H
Computer1 port
Inputs image signals from a computer and component
video signals from other video sources.
x When using a splitter
Connect a computer cable to the splitter.
x When not using a splitter
Connect a computer cable to the commander's
Monitor Out/Computer2 port (
).
I
Monitor
Out/Computer2 port
Outputs analog RGB signals input from the Computer1
port to an external monitor. You cannot output signals
input from other ports or component video signals.
J
Audio Out port
Outputs audio from the currently projected image to an
external speaker.
K
Remote receiver
Receives signals from the remote control.
L
Monitor
Out/Computer2 port
Connect a computer cable to the receiver's Computer1
port (
).
(Only if you are not using a splitter when projecting a
computer image.)
M
Computer1 port
Inputs image signals from a computer and component
video signals from other video sources.
N
RS-232C port
When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s "ESC/VP21 Commands" p.53
O
USB(TypeB) port
This cannot be used on the commander.
Part Names and Functions
11
To Next Page
Loading...
