Check Remedy
Is the correct port selected? Change the image by pressing the [Source Search] button on the commander's control panel or remote control.
s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.34
Is the power for the computer or video source turned on? Turn the power on for the equipment.
Are the image signals being output to the projector?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
If the image signals are only being output to the computer's LCD monitor or to the accessory monitor, you need to
change the output to an external destination as well as the computer's own monitor. For some computer models, when
the image signals are output externally, they no longer appear on the LCD monitor or accessory monitor.
If the connection is made while the power of the projector or computer is already turned on, the Fn key (Function key)
that changes the computer's image signal to external output may not work. Turn the power for the computer and the
projector off and then back on again.
s "From Installation to Projection" p.32
s Computer's documentation
Cannot view 3D images
Check Remedy
Is the Configuration menu set correctly? x Set 3D Display to On.
x Set 3D Format to Auto or the same format as the 3D signal from the connected device.
s Signal - 3D Setup p.58
Is the input signal a 3D signal? Check that the connected playback device and the content being played support 3D signals.
Do the HDMI cables and the HDMI splitter support 3D signals? Use HDMI cables and an HDMI splitter that support 3D signals.
Is the polarizer attached correctly? x If the projector and the polarizer are not combined correctly, you cannot view 3D images. Attach so that the number on
the base of the projector and the polarizer match. See the following manual for details.
s
Startup Guide
x Perform Inverse 3D Image from 3D Setup.
s Signal - 3D Setup p.58
Are you using a silver screen designed for passive 3D images? These projectors can only project 3D images onto a silver screen. Prepare a silver screen designed for passive 3D images.
Are you wearing the 3D Glasses correctly? To view 3D images with the projectors, you need passive polarized 3D glasses. Use the supplied or optional 3D Glasses
(ELPGS02A/ELPGS02B).
s "Optional Accessories" p.94
Problem Solving
74
To Next Page
Loading...
